Philly Posted January 18, 2020 Share Posted January 18, 2020 When I load a table in my pinballx the game starts to load and then goes back to the front end can anyone help please Link to comment Share on other sites More sharing options...
scutters Posted January 18, 2020 Share Posted January 18, 2020 You need to attach copies of your pinballx.ini & log.txt files But as you're a new user, i have to ask have you installed any emulators?, pinballx is only a front end to open other applications and it comes with example media and game listings for a few tables but not the applications themselves. If you install only pinballx you can try to open one of the example entries, it will fail and just exit back out as you describe. Link to comment Share on other sites More sharing options...
Philly Posted January 19, 2020 Author Share Posted January 19, 2020 That’s what it is doing I am very new to the pinball I have the pinball fx3 installed on it and I have zen pinball installed on it but they don’t show up on the pinballx front end I am so new to it I am unsure what I need to do to configure it all to come together Link to comment Share on other sites More sharing options...
Philly Posted January 19, 2020 Author Share Posted January 19, 2020 log.txt PinballX.ini Link to comment Share on other sites More sharing options...
Draco1962 Posted January 19, 2020 Share Posted January 19, 2020 You have to tell the PinballX where the program is installed. Also, these settings are for the Steam version. It will not work if you have acquired Pinball FX3 and Zen from other sources ("free" download vs. Paid). Link to comment Share on other sites More sharing options...
Philly Posted January 19, 2020 Author Share Posted January 19, 2020 Oh boy I can see this is gonna be a A rough one for me I’m so confused Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted January 20, 2020 Share Posted January 20, 2020 I dont see the issue occurs in the log file. Do you have pimnballx running as administrator ? If not, try that. I think that pbx doesn't see the process, because of too low privileges (just an assumption) Your fx3 setup looks fine Link to comment Share on other sites More sharing options...
Philly Posted January 23, 2020 Author Share Posted January 23, 2020 Even when I run As administrator it starts to load and then goes back to the front end Link to comment Share on other sites More sharing options...
Philly Posted January 23, 2020 Author Share Posted January 23, 2020 I’m too new to this I’m thinking ether I don’t have something set up right or there is something else I have to install Link to comment Share on other sites More sharing options...
Philly Posted January 23, 2020 Author Share Posted January 23, 2020 Can anyone teamviewer and help me setup correctly I will pay Link to comment Share on other sites More sharing options...
scutters Posted January 23, 2020 Share Posted January 23, 2020 Where is Pinball FX3 installed? In your ini file you have it set as; WorkingPath=C:\Program Files (x86)\Steam Executable=steam.exe When you launch pinball fx3 manually where do you run it from and do you run via steam.exe or Pinball FX3.exe? Link to comment Share on other sites More sharing options...
Philly Posted January 26, 2020 Author Share Posted January 26, 2020 Ok so I finally figured out how to download a visual pinball x table and put it in the right spot and get it to load but I can’t figure out how to get it to display on my monitors correctly Link to comment Share on other sites More sharing options...
Draco1962 Posted January 26, 2020 Share Posted January 26, 2020 Please stick to one pinball simulator or emulator. Let the guys help you with Pinball FX3 first before you venture to Visual Pinball X. Link to comment Share on other sites More sharing options...
Philly Posted January 26, 2020 Author Share Posted January 26, 2020 Ok I’m sorry I don’t mean to jump back and fourth but I spent like 50 on the Xbox one for some tables and when I whent to the pc I realized that the fx3 on it was different and I would have to buy the tables again and I was trying not to for now was the only reason why I put fx3 aside for now I’m sorry I don’t mean to confuse or upset anyone I am just very new and trying to figure it out I have put a lot of money out trying too get my cabinet together and I don’t have the money to buy the fx3 tables right now so I was just trying too get my cabinet setup with something for now that didn’t cost me just until I can make some more money to buy more tables And fx3 wanted a code and when I emailed them they emailed me back asking for a picture of my cabinet so I sent it and they never sent me a code Link to comment Share on other sites More sharing options...
Draco1962 Posted January 26, 2020 Share Posted January 26, 2020 Email them again? Link to comment Share on other sites More sharing options...
Philly Posted January 26, 2020 Author Share Posted January 26, 2020 I will thank you very much Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted January 27, 2020 Share Posted January 27, 2020 I received a code in 1 day after sending a pic of my cab. Not sure if they still have steam sale, but all the dlc's where 125 euros last month. I know the feeling to have all double. On ps3 and ps4 bought all the pinball arcade. On ps4 and nintendo switcg bought all the fx3 tables. And now on pc. The same. But.. it's worth it (well not the arcooda part) Link to comment Share on other sites More sharing options...
Philly Posted January 27, 2020 Author Share Posted January 27, 2020 Ya I have no problem with buying them again I was just waiting to make some more money and hope I can get my cabinet finished setting up in the mean time Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted January 27, 2020 Share Posted January 27, 2020 Also important! But cabinet finished??? It is never finished Link to comment Share on other sites More sharing options...
Philly Posted January 27, 2020 Author Share Posted January 27, 2020 So I’ve played some fx3 on it and I figured out how to get my buttons on my cab to work with the game ya now to figure out how to get backglass one 2monitor Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted January 27, 2020 Share Posted January 27, 2020 1 hour ago, Philly said: So I’ve played some fx3 on it and I figured out how to get my buttons on my cab to work with the game ya now to figure out how to get backglass one 2monitor I use DOFlinX for Backglasses and for DOF itself. If you don't use DOF, you can still use DofLinx for FX backglasses. You can also prevent the backglasses from PBX to be hidden, to uncheck the Hide backglass in gamemanager. Than it will leave the backglass (picture or video) from PBX in Zen Pinball all up to you what you want Link to comment Share on other sites More sharing options...
Recommended Posts