joyrider3774 Posted November 1, 2019 Share Posted November 1, 2019 @Mike_da_Spike you probably forgot to set REPOSITIONWINDOW to 1 by default its set at 0 which means it sets the position back to the center of the screen you have to set to 1 or it won't work. I will see if i can add another button for joystick. 1 Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted November 1, 2019 Share Posted November 1, 2019 RTFM Mike RTFM .... Sorry ! I'm a real IT prof. Never read the manual. Sorry ! Link to comment Share on other sites More sharing options...
joyrider3774 Posted November 2, 2019 Share Posted November 2, 2019 6 hours ago, Mike_da_Spike said: RTFM Mike RTFM .... Sorry ! I'm a real IT prof. Never read the manual. Sorry ! No problem, btw @Mike_da_Spike try this version PinballFX3Launcher.zip now, replace exe, run it once and check ini file, it will have added a LAUNCHBUTTON2 entry which you can change. Default is joystick button 1 which equals B button on a XBOX 360 joypad to also be used as a the launch button. Just an alternate (extra) button for LAUNCHBUTTON Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted November 2, 2019 Share Posted November 2, 2019 Awesome @joyrider3774 Buttons works and setting the parameter in the ini, I was able to drag and stick the menu looks like this (sorry for my not steady hand) 20191102_063501.mp4 1 Link to comment Share on other sites More sharing options...
joyrider3774 Posted November 2, 2019 Share Posted November 2, 2019 just released the new v4.0 version and sources contains all the latest changes that have been added the last few days. https://github.com/joyrider3774/PinballX_Launcher_app/releases/tag/4.0 - Added Alternate Keyboard and Joypad launch key / button (LAUNCHKEY2 and LAUNCHBUTTON2 ini settings) - Added window dragging and startup position support (REPOSITIONWINDOW, POSLEFT, POSTOP ini settings) documentation about the new settings has been updated as well https://github.com/joyrider3774/PinballX_Launcher_app 1 Link to comment Share on other sites More sharing options...
susoarkangel Posted November 8, 2019 Share Posted November 8, 2019 I need your help, since I follow the steps but it is clear that something I am missing or doing wrong. Configure keyboard and controls, select two players or three players pulse and do not start pinball FX3 with any table, leave and as if nothing. I enclose ini and some screenshots if they can help me PinballFX3Launcher.ini PinballX.ini Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted November 8, 2019 Share Posted November 8, 2019 Do you use steam or a "standalone" version of Pinball FX3? If you have a "standallone" version, change the PinballFX3Launcher.ini : PATH=C:\<PATH TO FX3 exe>\Pinball FX3.exe and change the follwoing to 1 DONTREADSTEAMPATHREG=1 This will avoid that the steam path is reading from registry (I highly recommend to use steam and install Steam) (also remove the -offline, this will avoid you to have check the leader boards etc.) Link to comment Share on other sites More sharing options...
susoarkangel Posted November 8, 2019 Share Posted November 8, 2019 1 hour ago, Mike_da_Spike said: Do you use steam or a "standalone" version of Pinball FX3? If you have a "standallone" version, change the PinballFX3Launcher.ini : PATH=C:\<PATH TO FX3 exe>\Pinball FX3.exe and change the follwoing to 1 DONTREADSTEAMPATHREG=1 This will avoid that the steam path is reading from registry (I highly recommend to use steam and install Steam) (also remove the -offline, this will avoid you to have check the leader boards etc.) I get to load pinball FX3 but I get 1 Player and select table I also have an offline position because this way since PinballX does not make me have to touch any button or keyboard, leave the table directly, but with this it ignores my PFX3 version is standra but cabinet mode activated PinballFX3Launcher.ini Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted November 8, 2019 Share Posted November 8, 2019 1 hour ago, susoarkangel said: I get to load pinball FX3 but I get 1 Player and select table I also have an offline position because this way since PinballX does not make me have to touch any button or keyboard, leave the table directly, but with this it ignores my PFX3 version is standra but cabinet mode activated PinballFX3Launcher.ini 1.44 kB · 0 downloads Change the following line STARTPARAMS=--table_[TABLEFILE] -offline To STARTPARAMS=-applaunch 442120 The "table_[TABLEFILE]" is a passthrough from pbx (and tablefile will be the tablename you selected) Link to comment Share on other sites More sharing options...
susoarkangel Posted November 9, 2019 Share Posted November 9, 2019 9 hours ago, Mike_da_Spike said: Change the following line STARTPARAMS=--table_[TABLEFILE] -offline To STARTPARAMS=-applaunch 442120 The "table_[TABLEFILE]" is a passthrough from pbx (and tablefile will be the tablename you selected) With this last one, I worked a lot thanks for your help Link to comment Share on other sites More sharing options...
susoarkangel Posted November 9, 2019 Share Posted November 9, 2019 When I select 2 or more players, I get a screen with a message - You cannot access the online functions at this time, maybe due ...... - Retry Cancel There is a way to skip these messages Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted November 9, 2019 Share Posted November 9, 2019 Why are you not able to get online ? Are you able to launch within fx3 a multiplayer game ? Link to comment Share on other sites More sharing options...
susoarkangel Posted November 9, 2019 Share Posted November 9, 2019 13 minutes ago, Mike_da_Spike said: Why are you not able to get online ? Are you able to launch within fx3 a multiplayer game ? I don't have an internet connection in the pinball Link to comment Share on other sites More sharing options...
joyrider3774 Posted November 9, 2019 Share Posted November 9, 2019 Add -offline parameter at the end of start parameters maybe it helps. That message has nothing todo with multiplayer or the launcher. Link to comment Share on other sites More sharing options...
susoarkangel Posted November 9, 2019 Share Posted November 9, 2019 10 minutes ago, joyrider3774 said: Add -offline parameter at the end of start parameters maybe it helps. That message has nothing todo with multiplayer or the launcher. where and should i put it .. I'm trying to learn all this but the truth is complicated Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted November 9, 2019 Share Posted November 9, 2019 1 hour ago, susoarkangel said: where and should i put it .. I'm trying to learn all this but the truth is complicated It is all easy. In setting.exe put it as paramater. See the next screenshot Link to comment Share on other sites More sharing options...
joyrider3774 Posted November 9, 2019 Share Posted November 9, 2019 Not sure setting it as parameter in pinball x settings app wil work the laucher only takes 1st parameter but hae not tried. Better to do it in the pinball fx 3 launchers ini file at the end of startparams if i remember correctly. Am not at home to verify atm @susoarkangel In pinball FX3.ini change STARTPARAMS=-applaunch 442120 to STARTPARAMS=-applaunch 442120 -offline Link to comment Share on other sites More sharing options...
susoarkangel Posted November 11, 2019 Share Posted November 11, 2019 On 11/9/2019 at 9:03 PM, joyrider3774 said: Not sure setting it as parameter in pinball x settings app wil work the laucher only takes 1st parameter but hae not tried. Better to do it in the pinball fx 3 launchers ini file at the end of startparams if i remember correctly. Am not at home to verify atm @susoarkangel In pinball FX3.ini change STARTPARAMS=-applaunch 442120 to STARTPARAMS=-applaunch 442120 -offline After restarting and retesting, I don't know what happened but the script for pinball takes almost 1 minute to appear on the screen Link to comment Share on other sites More sharing options...
hairydvd Posted November 15, 2019 Share Posted November 15, 2019 Just happened across this utility tonight....... WOW did not know it existed, you sir have opened up a whole new world to me using table launched from PinballX Installed like a dream using instructions on GitHub THANKS ! Link to comment Share on other sites More sharing options...
bushav Posted February 17, 2020 Share Posted February 17, 2020 I installed the player select plugin last night and it is working great! Took dumb me a few minutes to figure out which github file I needed. Once I had the right file is was easy cheesy. I think this will make me more likely to suggest FX3 tables when friends come over. I never liked breaking out the keyboard to manipulate the FX3 menu. It effectively "broke the illusion"! Link to comment Share on other sites More sharing options...
joyrider3774 Posted February 17, 2020 Share Posted February 17, 2020 Yeah by default with github links you get to see the source code, you always need to check the releases tab / section for binarie downloads if they have been provided. Glad you like it Link to comment Share on other sites More sharing options...
joyrider3774 Posted February 19, 2020 Share Posted February 19, 2020 Version 4.1 Released, nothing major but i added in support for changing the text colors using the ini. Github page is updated with info about the colors that needs to be in hexadecimal RGB format (color1 selected button, color2, disabled button, color3 title credits and countdown timer). If you don't need to respecify colors you don't need to download this release if it's already working for you. 1 Link to comment Share on other sites More sharing options...
Recommended Posts