Jump to content
SpesoftPinballXConvert-It
Sign in to follow this  
Mike_da_Spike

[GUIDE] pinDMDv3 & Teensy 'conflict' in pbx

Recommended Posts

Just a short notice if you have a pinDMD3  and a Teensy 3.2 with an octo28 adaptor.
When installing both in your cab, the pinDMD3 didn't show anything in PBX
All tables worked fine, but not in PBX.

Both are Teensy boards, but my DMD was on com5 and the Teensy 3.2 on com3
the pinDMD_log.txt in the pinballX fodlers shows :

dll version:             REV-pinDMD3-01006
locating device:         PASS (COM3)
creating connection:     FAIL (COM3)
pinDMD3 enabled:         FALSE

This should be com5.
 

Solution :

Create a pinDMD.ini in the pinballX folder with the following :

[communication]
debug=1
comport=COM5

[pinmame]
log_frames=0

This will force PBX to use your pinDMD3 on COM5 

Copy this file also to your  Visualpinball\XDMD path to have ultraDMD working

 

  • Thanks 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...