Mike_da_Spike Posted July 9, 2019 Share Posted July 9, 2019 Just a short notice if you have a pinDMD3 and a Teensy 3.2 with an octo28 adaptor. When installing both in your cab, the pinDMD3 didn't show anything in PBX All tables worked fine, but not in PBX. Both are Teensy boards, but my DMD was on com5 and the Teensy 3.2 on com3 the pinDMD_log.txt in the pinballX fodlers shows : dll version: REV-pinDMD3-01006 locating device: PASS (COM3) creating connection: FAIL (COM3) pinDMD3 enabled: FALSE This should be com5. Solution : Create a pinDMD.ini in the pinballX folder with the following : [communication] debug=1 comport=COM5 [pinmame] log_frames=0 This will force PBX to use your pinDMD3 on COM5 Copy this file also to your Visualpinball\XDMD path to have ultraDMD working 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.