Trantor Posted July 23, 2019 Author Share Posted July 23, 2019 4 hours ago, scutters said: Your pinballx.ini file looks corrupt to me, the [display] section is incomplete. Copy it off somewhere and then replace it with an old one (use one from earlier post in this thread if you don't have a backup). You'll then need to check everything looks ok in Settings.exe (pay special attention to [JoyCodes] as that section is different between last and current ini files as well as Other Systems, might be other difference too. Also re-check outhere's tips in 4th post https://www.gameex.info/forums/topic/22166-backglass-images-not-showing-up/?do=findComment&comment=186321 after. Hope that helps.. HI Scutters, I did as you recommended and it did in fact fix the fullscreen issue, but I'm back to the problem I had way back at the beginning of this post, the backglass isn't going to the second monitor but behind the main display. Any suggestions? Last time, Tom Speirs posted "fixed" exe for me but I'm not sure if the same exe will still work. Link to comment Share on other sites More sharing options...
scutters Posted July 23, 2019 Share Posted July 23, 2019 Hi @Trantor Can you post new copies of your pinballx.ini and log.txt files for review? Thanks. Link to comment Share on other sites More sharing options...
GAH1068 Posted July 24, 2019 Share Posted July 24, 2019 Another thing to try is checking the ordering your monitor positions in Windows. I had issues when I first setup my cab that if screen 2 was not setup to the right of screen one that my backglass would often stay hidden behind the playfield even though my PBX settings were correct. Link to comment Share on other sites More sharing options...
Trantor Posted July 25, 2019 Author Share Posted July 25, 2019 Scutters: Here are the current files. GAH1068: I had that problem and fixed it. In Vpinball 955 I get the tables working correctly, but not through PinballX PinballX.ini log.txt Link to comment Share on other sites More sharing options...
scutters Posted July 25, 2019 Share Posted July 25, 2019 A couple of things to try; Try changing the backgalss display number in Settings.exe Display Settings first, try the other options in the dropdown one at a time. The monitor numbers don't always match windows. If that doesn't work, still in display settings.exe you could try adjusting the the x & y relative positions to move the backglass that way, the values you use will depend on where the backglass is currently located, and your display positions as setup in windows. Set the monitor for the backghlass to match the backglass then adjust x & y. You might also want to turn off the auto position b2s option in display settings. Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted July 25, 2019 Share Posted July 25, 2019 Can you also post a screenshot of your windows display settings ? Just to be sure that we are all on the same page Link to comment Share on other sites More sharing options...
Trantor Posted July 25, 2019 Author Share Posted July 25, 2019 scutters: The reposition of the X coordinte trick worked! Thanks! On the downside though, for some reason now my joypad button configs only work in PinballX but don't work in Visual Pinball! (just not recognized, had to go back to keyboard) I can set joypad configs in VP but then I have no way to exit back to PX. Sorry to be such a hassle... Link to comment Share on other sites More sharing options...
scutters Posted July 25, 2019 Share Posted July 25, 2019 Not too sure what you mean... the joypad works only in VP or in PBX?, but not in both together? Screenshot of of your VP settings might help. In the last posted pinballx.ini file there wasn't an Exit Emulator button set, that'd be why you can't exit back to pinballx. Is that the only problem?, will need more info.. Link to comment Share on other sites More sharing options...
Trantor Posted July 25, 2019 Author Share Posted July 25, 2019 All the buttons work within Pinbll X (I have an 8 button cab running through a joypad card.) I can do all the controls within PX, but once I launch a table the only keys that work are on the keyboard. It doesn't recognize the buttons any more. When I exit VP, and PX comes back up, everything works again. Link to comment Share on other sites More sharing options...
Trantor Posted July 25, 2019 Author Share Posted July 25, 2019 I stand corrected, my left nudge button is now the plunger. Link to comment Share on other sites More sharing options...
scutters Posted July 25, 2019 Share Posted July 25, 2019 Can you post the visual pinball key/joy setup page screen shot? under preferences menu. Sounds like they just don't match pinballx setup Thanks. Link to comment Share on other sites More sharing options...
Trantor Posted July 25, 2019 Author Share Posted July 25, 2019 I have no idea where the button 1 settings are coming from. I reset them all to none, then reloaded PX, tried table, the nudge didn't work, but then they were back this way again. Link to comment Share on other sites More sharing options...
scutters Posted July 25, 2019 Share Posted July 25, 2019 Hmm... ok, set the buttons up in correctly in VP again. Recheck in pinballx settings.exe you don't have autoconfigure set for VP (it wasn't in the last ini file), then try again. Re-post the log and ini files again after, and confirm if VP buttons are all set to button 1 again or not. Link to comment Share on other sites More sharing options...
Trantor Posted July 25, 2019 Author Share Posted July 25, 2019 Chnged the settings in VP to fit my controller, Autoconfig was off. And now Start was volume down, left nudge worked And the others did nothing. VP settings are unchanged. PinballX.ini Link to comment Share on other sites More sharing options...
scutters Posted July 25, 2019 Share Posted July 25, 2019 16 minutes ago, Trantor said: VP settings are unchanged So VP button setup is how you set it up?, but the buttons don't function correctly in VP?.. Sorry, i'm a little confused! Can you post a screenshot of your 'correct' VP joystick setup as well as the pinballx log file and confirm if the VP joysick settings are changing after launch from pinballx. Thanks. Link to comment Share on other sites More sharing options...
Tom Speirs Posted August 6, 2019 Share Posted August 6, 2019 Log file please. Link to comment Share on other sites More sharing options...
Recommended Posts