booltack Posted March 14, 2019 Share Posted March 14, 2019 Hello everyone, I just updated pinballX from version 3.29 to version 3.30. When I run pinballX, the video of the table on the frontend is well displayed but not the video backglass ... Instead I have a black square that appears on the backglass screen but no more video as on version 3.29 When I run the table with vpx, everything works normally = table + backglass + DMD When I leave the table, again no more video backglass but this black square ... By and large pinballX does not read, no more or bad backlglass media, maybe path pbm ... my lav codecs are updated. Can someone help me Link to comment Share on other sites More sharing options...
Tom Speirs Posted March 15, 2019 Share Posted March 15, 2019 As mentioned in the 3.30 release notes the screen number handling has been improved and changed. Please check your display settings in the setup wizard. Previous versions were more forgiving with mistakes too. Link to comment Share on other sites More sharing options...
booltack Posted March 15, 2019 Author Share Posted March 15, 2019 I went to settings, settings of displays and tested the 5 screens for the backglass. it did not work for any of the screens. just the screen 2 shows me a black square perimeter on the backglass screen. an other idea ? Link to comment Share on other sites More sharing options...
scutters Posted March 15, 2019 Share Posted March 15, 2019 Please post your pinballx.ini and your log.txt files Are you trying to use B2s in the front end rather than video as stated? - if so a 64bit install would cause problems. The information that will help is in those files. Link to comment Share on other sites More sharing options...
Recommended Posts