blubberpud Posted February 8, 2019 Share Posted February 8, 2019 Hey! I am in the process of building a cabinet, have 3 screens and when I launch a game from PinballX my playfield (Display1) turns green in the "Loading..." screen and colors are messed until I reset the resolution or reboot. Has anyone seen this or have any recommendations? Launching tables from VP9.92 - no issues System Win7 64x / NVidia GTX 750 Ti PinballX 3.28 (32bit) / VisualPinball 9.92 / VPM 3.1 Thanks in advance, Jay Link to comment Share on other sites More sharing options...
Draco1962 Posted February 9, 2019 Share Posted February 9, 2019 Hi Jay - can you attach copies of your pinballx.ini and log.txt files for review? Also, do you have any codecs installed? If none, you may want to install the LAV codecs found here. Link to comment Share on other sites More sharing options...
joyrider3774 Posted February 9, 2019 Share Posted February 9, 2019 Does it stay green when playing in visual pinball or in windows as well when it happens or only inside pinballx ? If it's only in pinballx it's probably the codecs you need as draco pointed out. If it happens elsewhere i would also make sure to have latest video card drivers installed from nvidia themselves not the windows supplied ones. 1 Link to comment Share on other sites More sharing options...
scutters Posted February 9, 2019 Share Posted February 9, 2019 Check drivers & codecs as suggested above, and as it appears to affect only one screen i'd check your cable/connections too. 1 Link to comment Share on other sites More sharing options...
Mike_da_Spike Posted February 10, 2019 Share Posted February 10, 2019 I had the same with my Samsung Tv when starting the cab. Removing the Hdmi and put back was a workaround During powering on of the cabinet, the pc started on a 4k 60hz resolution mode, but the TV was starting in 4k 30p. This gave me the same behaviour. First as workaround I set the resolution to 4k 30hz when shutting down the pc and at startup of pbx I moved it to 4k 60hz again. Finally I changed a setting in the Tv. Set it to pc mode (but that causes some lag) and another setting (that prevents the lag), but not sure what the setting was) That fixed iyt for me And use HDMI1 port !! Link to comment Share on other sites More sharing options...
blubberpud Posted February 11, 2019 Author Share Posted February 11, 2019 On 2/10/2019 at 1:31 AM, Mike_da_Spike said: I had the same with my Samsung Tv when starting the cab. Removing the Hdmi and put back was a workaround During powering on of the cabinet, the pc started on a 4k 60hz resolution mode, but the TV was starting in 4k 30p. This gave me the same behaviour. First as workaround I set the resolution to 4k 30hz when shutting down the pc and at startup of pbx I moved it to 4k 60hz again. Finally I changed a setting in the Tv. Set it to pc mode (but that causes some lag) and another setting (that prevents the lag), but not sure what the setting was) That fixed iyt for me And use HDMI1 port !! Thanks everyone for your helpful responses! It ended up that I was plugged into the side HDMI2, switched it over the HDMI1 on the back and seems to be stable with no lag 2 Link to comment Share on other sites More sharing options...
Recommended Posts