Carnovash Posted January 31, 2019 Share Posted January 31, 2019 After installing some new Windows updates on my cab, all of a sudden the keyboard controls (Cab controls through iPAC) have stopped responding to the PinballX front-end. I've checked the control settings and they are still mapped correctly, and the controls work fine if I run Pinball FX3 directly. I thought it might be an application focus issue, but after tabbing back and forth the cab controls still do not work. This has been working fine for quite a while. Has anyone else experienced something like this? Any ideas? Thanks! Link to comment Share on other sites More sharing options...
BrandonLaw Posted January 31, 2019 Share Posted January 31, 2019 You try to reassign the USB port? Just swap the IPAC to another port...oddly enough will take steps to assign the IRQ as 'new' re-validating the hardware. Does a regular keyboard work? Link to comment Share on other sites More sharing options...
Draco1962 Posted January 31, 2019 Share Posted January 31, 2019 Also, if you are reporting a possible issue with PinballX, you should attach copies of your pinballx.ini and log.txt files so they can be reviewed. You also need to tell us if you are using any 3rd party software, such as x360ce, Xpadder, Joy2Key, or other related software. Link to comment Share on other sites More sharing options...
Carnovash Posted February 1, 2019 Author Share Posted February 1, 2019 15 hours ago, BrandonLaw said: You try to reassign the USB port? Just swap the IPAC to another port...oddly enough will take steps to assign the IRQ as 'new' re-validating the hardware. Does a regular keyboard work? I haven't tried to reassign the USB port yet, but I also have a wireless keyboard that I use to configure the cab, and it also does not send any inputs properly to PinballX. With a mouse if I click inside of the PinballX screen it will send a command PinballX it seems, but after that one command the keyboards continue to not function. Link to comment Share on other sites More sharing options...
Draco1962 Posted February 1, 2019 Share Posted February 1, 2019 On 1/31/2019 at 7:13 AM, Draco1962 said: Also, if you are reporting a possible issue with PinballX, you should attach copies of your pinballx.ini and log.txt files so they can be reviewed. You also need to tell us if you are using any 3rd party software, such as x360ce, Xpadder, Joy2Key, or other related software. I must be talking to myself. Can you attach the requested files and answer question? Thank you. 1 Link to comment Share on other sites More sharing options...
Carnovash Posted February 1, 2019 Author Share Posted February 1, 2019 On 1/31/2019 at 4:13 AM, Draco1962 said: Also, if you are reporting a possible issue with PinballX, you should attach copies of your pinballx.ini and log.txt files so they can be reviewed. You also need to tell us if you are using any 3rd party software, such as x360ce, Xpadder, Joy2Key, or other related software. Finally had the chance to fire up my cab and get the requested files. No other 3rd party software related to controls are being used. I do have dmdext-v1.6.0 setup to run my DMD display. Thanks! PinballX.ini log.txt 1 Link to comment Share on other sites More sharing options...
Outhere Posted February 1, 2019 Share Posted February 1, 2019 Use the latest version of pinballx And also make sure you have the latest LAV Filters Use the 32 Bit https://www.pinballx.com/ Also you might want try the new version of DMDext v1.7.1 -x86.zip https://github.com/freezy/dmd-extensions/releases/tag/v1.7.1 1 Link to comment Share on other sites More sharing options...
Tom Speirs Posted February 4, 2019 Share Posted February 4, 2019 So this just affects pfx 3 or everything? Also outhere is right. Hard to support old versions. Link to comment Share on other sites More sharing options...
Recommended Posts