midhit6 Posted June 10, 2018 Share Posted June 10, 2018 This may be a very simple (and stupid) issue I am having... I cannot get Settings in PinballX to accept Joystick Codes from my ZebsBoard Digital Plunger. Everything works fine outside of PinballX, and PinballX seems to function fine with a keyboard. In Settings, when I try to configure the buttons on my cabinet, the program automatically sets to a weird axis before I can press the button I am trying to configure. I tried playing with different codes within the PinballX.ini file, but nothing seems to work. I must have something incorrect within PinballX as I know the cabinet buttons work as expected directly in an emulator, and they show the correct character(s) in Notepad. Any suggestions would be greatly appreciated, thanks in advance! Below are the log.txt and PinballX.ini files... the PinballX.ini will show a mess with the joystick codes which is what I have been playing with. Not sure if it will help, but the Digital Plunger is hardcoded for the Standard button layout for Visual Pinball: Left Flipper = L Shift Right Flipper = R Shift etc. PinballX.ini log.txt Link to comment Share on other sites More sharing options...
RedDog Posted June 11, 2018 Share Posted June 11, 2018 Requested that this thread be moved to the PinballX forum. It was posted in the GameEx forum in error. Link to comment Share on other sites More sharing options...
GCS2000 Posted June 12, 2018 Share Posted June 12, 2018 Mine does this as well and its why I moved from pbx to pinup. Hope you can get this worked out I was never able to solve it Link to comment Share on other sites More sharing options...
Tom Speirs Posted June 15, 2018 Share Posted June 15, 2018 Could you please tell me exactly what it sets automatically.. Thanks. Tom. Link to comment Share on other sites More sharing options...
midhit6 Posted June 20, 2018 Author Share Posted June 20, 2018 Sorry for the delayed response, I was out of town and not able to verify until tonight. It sets (regardless of what button I push, in fact I think it does it as soon as I hit the "...") the following: [JOYCODE_1_RZAXIS_POS_SWITCH] Link to comment Share on other sites More sharing options...
Tom Speirs Posted June 20, 2018 Share Posted June 20, 2018 I emailed Steve about this. Hopefully have a solution soon. Link to comment Share on other sites More sharing options...
Recommended Posts