Skitso Posted May 29, 2018 Share Posted May 29, 2018 I have Pinballx set up nicely and everything works without issues when using keyboard. I tried to configure PS4 controller but every button automatically sets to some axis before I can press the correct button. When I start pinballx, each flipper press skips two or three tables and when in table view, left flipper also nudges table. I'm using VPX tables and I just can't get it working.. any ideas? Thanks Link to comment Share on other sites More sharing options...
midhit6 Posted June 10, 2018 Share Posted June 10, 2018 I am having a very similar issue when trying to configure the flipper buttons, etc. in settings, difference is I'm using a digital plunger from Zebsboards that my buttons are wired through. I've tried playing with the values in pinball.ini but can't get much response in PinballX. I'll let you know if I figure anything out, but I'm running out of ideas. Link to comment Share on other sites More sharing options...
Draco1962 Posted June 10, 2018 Share Posted June 10, 2018 1 hour ago, midhit6 said: I am having a very similar issue when trying to configure the flipper buttons, etc. in settings, difference is I'm using a digital plunger from Zebsboards that my buttons are wired through. I've tried playing with the values in pinball.ini but can't get much response in PinballX. I'll let you know if I figure anything out, but I'm running out of ideas. You should open a separate thread for your issue since not the same type of controller. You will want to attach copies of your pinballx.ini and log.txt files. Link to comment Share on other sites More sharing options...
Recommended Posts