LahaBo Posted May 25, 2018 Share Posted May 25, 2018 Hello, I have a problem with the Pinball Arcade FreeCamera Mod. When I start a Table without PinballX everything is fine. When I open a Table under PinballX the Playfield only shows a Black Screen. I hear the Sound of the Game and the Backglass can be seen on the 2nd Monitor. Pinball FX2 starts without problems. If I use Alt+Tab and close the Black Screen Window the Table comes to the Top. If PinballX is started in Windowed Mode everything is displayed correctly. I have already tried a lot but can not find the error. All programs are up to date. Maybe someone can help me. Thanks, LahaBo Link to comment Share on other sites More sharing options...
BrandonLaw Posted May 26, 2018 Share Posted May 26, 2018 I had this same issue with FX3. It was driving me nuts as I had admin set correctly/fresh installs/ect. As I do not use FX2, I'm not sure if it has cab support, but in FX3, the cab support being turned on cannot have the rotation also enabled from within PBX. Turn off the rotation in PBX and your focus will return. I hope this helps! Link to comment Share on other sites More sharing options...
LahaBo Posted May 26, 2018 Author Share Posted May 26, 2018 Thank you for your answer. Unfortunately, that does not work for me. I deactivated the rotation for FX2, this game does not cause any problems. For Pinball Arcade you can not adjust the rotation in PinballX. I have already reinstalled everything, without success. Admin rights for all programms are assigned. Maybe someone has an idea. Link to comment Share on other sites More sharing options...
Draco1962 Posted May 26, 2018 Share Posted May 26, 2018 Attach copies of your pinballx.ini and log.txt files in reply to your post. You should do this every time you post an issue with the frontend. You should probably be using fullscreen windowed mode anyway. Link to comment Share on other sites More sharing options...
BrandonLaw Posted May 26, 2018 Share Posted May 26, 2018 Also, make sure to grab a focus logger. Definitely a good tool to have with frontend management. 1 Link to comment Share on other sites More sharing options...
jeverds Posted May 26, 2018 Share Posted May 26, 2018 I have the same problem since the last update Link to comment Share on other sites More sharing options...
Draco1962 Posted May 26, 2018 Share Posted May 26, 2018 9 minutes ago, jeverds said: I have the same problem since the last update Same problem. Attach copies of your pinballx.ini and log.txt please. It does no good to say you have the same issue (which may or may not be the case) without more information about your setup. Link to comment Share on other sites More sharing options...
LahaBo Posted May 27, 2018 Author Share Posted May 27, 2018 Fullscreen Windowed Mode does not work too. Here are my files. log.txt PinballX.txt Link to comment Share on other sites More sharing options...
jeverds Posted May 27, 2018 Share Posted May 27, 2018 14 hours ago, Draco1962 said: El mismo problema. Adjunte copias de su pinballx.ini y log.txt por favor. No sirve decir que tiene el mismo problema (que puede o no ser el caso) sin más información sobre su configuración. My team has not changed anything and with the previous version my version of TPA FRE CAMERA MOD worked perfectly.After updating to pinball x 3.01 the problem started.Sorry for my english [SETTINGS] VER 3.01.log log VER 3.01.txt PinballX VER 3-01.ini [SETTINGS] EARLIER VERSION.log log EARLIER VERSION.txt PinballX EARLIER VERSION.ini Link to comment Share on other sites More sharing options...
Tom Speirs Posted May 27, 2018 Share Posted May 27, 2018 Plesee try the 32 bit install and report back. Link to comment Share on other sites More sharing options...
LahaBo Posted May 27, 2018 Author Share Posted May 27, 2018 Have the same problem with the 32bit version. Even an older version does not fix the error. Link to comment Share on other sites More sharing options...
jeverds Posted May 27, 2018 Share Posted May 27, 2018 3 hours ago, Tom Speirs said: Plesee try the 32 bit install and report back. With 32 bit version the fault also occurs.My last version with which I worked before updating is 2.91.Between the 2.91 and the 3.01 I have not tried any more. Link to comment Share on other sites More sharing options...
Tom Speirs Posted May 27, 2018 Share Posted May 27, 2018 1 hour ago, jeverds said: With 32 bit version the fault also occurs.My last version with which I worked before updating is 2.91.Between the 2.91 and the 3.01 I have not tried any more. Maybe Pinball Arcade got an update? Please try 2.91 again and see if you still have an issue. Thanks. Tom. Link to comment Share on other sites More sharing options...
jeverds Posted May 27, 2018 Share Posted May 27, 2018 36 minutes ago, Tom Speirs said: Maybe Pinball Arcade got an update? Please try 2.91 again and see if you still have an issue. Thanks. Tom. I have the latest version of arcade pinball.With pinball x 2.91 all OK. Link to comment Share on other sites More sharing options...
Tom Speirs Posted May 28, 2018 Share Posted May 28, 2018 Should be fixed in 3.03 Now available. 2 Link to comment Share on other sites More sharing options...
jeverds Posted May 28, 2018 Share Posted May 28, 2018 17 hours ago, Tom Speirs said: Should be fixed in 3.03 Now available. Working well with version 3.03. Thanks for your interest 1 Link to comment Share on other sites More sharing options...
LahaBo Posted May 28, 2018 Author Share Posted May 28, 2018 Now it works for me. Thanks a lot. 1 Link to comment Share on other sites More sharing options...
guga_nt Posted May 30, 2018 Share Posted May 30, 2018 I also had this problem. Thanks for the update. Link to comment Share on other sites More sharing options...
Recommended Posts