simbamame Posted May 4, 2017 Share Posted May 4, 2017 Hi ive downloaded and installed the latest pinball X all configured and its all verified as ok, but when it loads pops up the pinball x logo then just goes back to the home screen. I tried a system restore and now the previous version doesnt work either.....any body else had any problems? HELP PinballX.ini Link to comment Share on other sites More sharing options...
Draco1962 Posted May 4, 2017 Share Posted May 4, 2017 Please try to download the latest version again and report back. We will also need your log.txt file if one has been created. Thanks, Ian. Link to comment Share on other sites More sharing options...
simbamame Posted May 4, 2017 Author Share Posted May 4, 2017 Hi Mike, i downloaded latest version again but still had same problem, but i played around with settings for a while and all of a sudden it worked....my only issue is it seems to take a lot longer to load the front end and the menu system seems to struggle a bit when scrolling threw tables, but i will persevere, maybe a few settings i can tweek. Thanks any way for the help :-) ian. Link to comment Share on other sites More sharing options...
Draco1962 Posted May 4, 2017 Share Posted May 4, 2017 Any time! Be sure that you have the LAV codecs installed for the videos. They can be downloaded from the PinballX.net site. They are recommended over the Shark007 codec pack as the require less resources. 1 Link to comment Share on other sites More sharing options...
simbamame Posted May 5, 2017 Author Share Posted May 5, 2017 :-) nice 1 that helped greatly, if you have any other ideas to help / tweek speed that will be much appreciated. Ian. Link to comment Share on other sites More sharing options...
Draco1962 Posted May 5, 2017 Share Posted May 5, 2017 Not knowing anything about what OS and innards your PC possesses (log.txt file helps a little in that regard), hard to say. Link to comment Share on other sites More sharing options...
Recommended Posts