wrd1972 Posted February 21, 2017 Share Posted February 21, 2017 I am running a three screen pincab. #1 40" playfield #2 23" monitor #3 23" monitor The backglass monitor configuration image is attached. Note the monitors are portrait side/side. When PBX is running and you are browsing the tables. The recorded backglass videos ONLY appear on monitor 2 and will NOT extend over to monitor #3. I have tried the various adjustments but just cant get it to appear on monitor #3. So in short, one half of the video is on monitor 2...and nothing on monitor 3. When playing VP9/VP10 tables, the DB2S backglasses work correctly and appear across the two monitors as expected. And if I set the "DB2S backglasses to be shown" option in PBX, then the DB2s backglass do appear across two screens when browsing tables. However, I would prefer to NOT use this method because load times for the DB2S backglasses is much longer. I would prefer the basic video recordings across both monitors just like if I had one great big monitor. All help appreciated. Thanks Bill Link to comment Share on other sites More sharing options...
Tom Speirs Posted February 22, 2017 Share Posted February 22, 2017 Hi, This is not currently possible in PinballX. Thanks. Tom. Link to comment Share on other sites More sharing options...
wrd1972 Posted February 22, 2017 Author Share Posted February 22, 2017 Tom, Thanks for the reply. Is it something that could possibly be done in a future release? Link to comment Share on other sites More sharing options...
Draco1962 Posted February 22, 2017 Share Posted February 22, 2017 Have you tried any 3rd party options such as Display Fusion? Link to comment Share on other sites More sharing options...
wrd1972 Posted February 23, 2017 Author Share Posted February 23, 2017 Draco, Yes I have tried display fusion, ultramon and several others. I am convinced that there is not a SW solution. There is a hard-ware solution but since I have the monitors in portrait, thats out as well. I called and talked to Matrox who make video PC HW and I am getting a special (and expensive) video card that is supposed to do what I want it to do. But there is a possibility that it wont play nice with my Nvidia 3D card. Just have to see but I really want to find a solution. Not sure what would be required to make this work with PinballX but if its something quick and easy. I would be eternally grateful and likely less lower in the funds if it could be added in. I think if folks new how much better having a much larger backglass display adds to the experience, then more folks would possibly consider doing the same. Again, it works flawless for VP. Link to comment Share on other sites More sharing options...
Draco1962 Posted February 23, 2017 Share Posted February 23, 2017 Even though the software solutions did not work, I appreciate your response in the event someone else attempts a similar setup, they will save some time by avoiding that path. Link to comment Share on other sites More sharing options...
wrd1972 Posted April 21, 2017 Author Share Posted April 21, 2017 Well it appears that I am totally out of luck with having the ability to have PBX display my backglasses across the two monitors in my backbox. Draco, Whats the likelihood that PBX will ever have the ability to span the backglasses across two monitors? If the ability were there to simply set-up the PBX backbox image up like you do in the "B2S screenRes editor", everything would work exactly as I need it. Also is there a way to just simply turn off the backglass images in PBX and ONLY use the main PF display for rotating the tables? Link to comment Share on other sites More sharing options...
Draco1962 Posted April 21, 2017 Share Posted April 21, 2017 That is really more of a Tom question as he is the PinballX author. If he says it is not possible presently, I would be remiss to take that as it could as it may not be possible programmatically. You may want to copy & paste your request into the Features and Enhancements Requests thread. I am not sure there is a way that simply disables backglass images. Link to comment Share on other sites More sharing options...
Carny_Priest Posted April 22, 2017 Share Posted April 22, 2017 If nothing else, the default image that is displayed when media is missing could be replaced with a pure black image. As far as a workaround, displaying a video outside of PinballX seems doable. But I'm not sure how we might communicate from PinballX which random table is getting displayed when you are in attract mode. Link to comment Share on other sites More sharing options...
gtxjoe Posted April 23, 2017 Share Posted April 23, 2017 You could try setting the backglass height and width to 1x1 so it won't really be visible Now that there is an extra monitor, topper, supported, you might be able to do what you are trying to do. Set Backglass monitor to you #2 monitor in your diagram and the topper monitor as #3 in your diagram. Use pbxrecorder to record 2 videos each with 1/2 of the backglass being recorded Link to comment Share on other sites More sharing options...
wrd1972 Posted May 15, 2017 Author Share Posted May 15, 2017 Joe thanks. I will try this tonight. I sure hope it works because having to use B2S really makes the backglass image very slow to change. Link to comment Share on other sites More sharing options...
Recommended Posts