NJDevil Posted December 30, 2016 Share Posted December 30, 2016 All this was set and working great. Screen 1 is playfield (1920x1080), 2 is backglass (1920x1080), 3 is DMD aka monitor (1024x768). Upgraded to version 2.28 and after the first game I played I lost my backglass. Further investigation it seems PinballX version 2.28 keeps resetting my backglass to screen 1. If I set it manually in Screenres.txt to monitor 3 and load PinballX I get my backglass again but once I go into a game it gets set back to screen 1 and its all lost again. Even stranger my backglass is screen 2 not even 3. If I set my backglass to 2 its where my DMD is. Doesn't matter what I set in the wizard it gets set to 1 after I launch a table. Me modifying Screenres.txt manually loading tables works great I can go in and out of tables no problem never changes. 1920 1080 1920 1080 3 0 0 1024 350 1920 0 0 ScreenRes After me selecting a Table from PinballX GUI. When I exit I no longer have backglass because its displaying under my playfield. 1920 1080 1920 1080 1 0 0 1024 350 1920 0 0 This a bug in 2.28 or do we need to calculate the offset from monitor 1 for the backglass and DMD? Link to comment Share on other sites More sharing options...
Umpa Posted December 30, 2016 Share Posted December 30, 2016 I had same problem. Open pinball x settings go to the display settings page and turn auto position direct b2s to no. I also have auto position dmd to no. Sent from my SAMSUNG-SM-G935A using Tapatalk 1 Link to comment Share on other sites More sharing options...
NJDevil Posted December 30, 2016 Author Share Posted December 30, 2016 Thankyou Umpa setting auto position direct b2s to no fixed it. 1 Link to comment Share on other sites More sharing options...
Recommended Posts