odie Posted December 9, 2016 Share Posted December 9, 2016 Sorry for the vague title for this thread. I have my cabinet 90% built and I am ready to start setting up tables. Also I have a 2 screens and a DMD on the way and a plunger from virtuapin. I see people using visual, future, fx2, zaccaria tables. But myself being new with no local resources I am trying to not setup myself up for failure. What are the easist tables to setup for someone with no experience? What systems support cabinet modes and DMDs? I have tried googling these questions I see no clear answers as it seems people have work arounds. I am trying to ease into it and not get frustrated and have fun as I progress. Thanks in advance. Link to comment Share on other sites More sharing options...
hlr53 Posted December 9, 2016 Share Posted December 9, 2016 I can speak to FX2 as I just set it up. Probably the easiest of them all. It must be set up for cabinet support from Zen. I have a pinDMD v3 with two monitors and FX2 works perfectly using PBX. You have to run DMDext.exe (by Freezy) before running FX2. For the back-glass there are many images or videos you can use for each table. I powered my pinDMD with a separate EVGA PC power supply. 5V from one side (red/black) of a 4 pin floppy drive Molex plug. I can post my PBX settings for FX2 after I get home. You will LOVE Virtuapin's DMD. It is BRIGHT! Give it 5V and plug into USB and it is ready to go. No drivers needed for Windows 10. I'm just getting started with Future Pinball and having some issues. Slamt1lt's tables are awesome! Haven't gotten to Visual yet. There is no direct support for Zaccaria tables but you can run it as a custom setting. I have the Zaccaria tables and about 40 Pinball Arcade. PBA also uses DMDext perfectly. 1 Link to comment Share on other sites More sharing options...
Draco1962 Posted December 9, 2016 Share Posted December 9, 2016 @hlr53 - Can you provide the settings you have for the Zaccaria tables from your pinballx.ini and a copy of your Zaccaria xml file? Link to comment Share on other sites More sharing options...
hlr53 Posted December 9, 2016 Share Posted December 9, 2016 Hi Draco, I don't have Zaccaria set up yet but they do place an XML in the documents\Zacarria_Pinball directory. I wonder if we can work with that? Attached settings.xml Link to comment Share on other sites More sharing options...
PcTeknic Posted December 10, 2016 Share Posted December 10, 2016 I prepared this database, but then I did not use it, I did not like Zaccaria Zaccaria Pinball.xml Link to comment Share on other sites More sharing options...
hlr53 Posted December 11, 2016 Share Posted December 11, 2016 For Future Pinball download pinDMD.dll and openGL32.dll from pinDMD.com and put them in your Future Pinball directory. Create a file in Notepad and name it pinDMD.ini Put this text inside: [communication] comport=COM3 Which is where Windows will probably put it. Check your device settings to be sure. For FX2 the settings are: [PinballFX2] Enabled=true WorkingPath=C:\Program Files (x86)\Steam Executable=steam.exe Parameters=-applaunch 226980 [TABLEFILE] Process=Pinball FX2.exe Rotate=False WaitFor=12 LaunchBeforeEnabled=True LaunchBeforeWorkingPath=D:\ Or whatever directory you put DMDext LaunchBeforeExecutable=DMDext.exe LaunchBeforeParameters=mirror --source=pinballfx2 --no-virtual --quit-when-done LaunchBeforeWaitForExit=False LaunchBeforeHideWindow=False 1 Link to comment Share on other sites More sharing options...
odie Posted December 15, 2016 Author Share Posted December 15, 2016 On 12/11/2016 at 5:04 PM, hlr53 said: For Future Pinball download pinDMD.dll and openGL32.dll from pinDMD.com and put them in your Future Pinball directory. Create a file in Notepad and name it pinDMD.ini Put this text inside: [communication] comport=COM3 Which is where Windows will probably put it. Check your device settings to be sure. For FX2 the settings are: [PinballFX2] Enabled=true WorkingPath=C:\Program Files (x86)\Steam Executable=steam.exe Parameters=-applaunch 226980 [TABLEFILE] Process=Pinball FX2.exe Rotate=False WaitFor=12 LaunchBeforeEnabled=True LaunchBeforeWorkingPath=D:\ Or whatever directory you put DMDext LaunchBeforeExecutable=DMDext.exe LaunchBeforeParameters=mirror --source=pinballfx2 --no-virtual --quit-when-done LaunchBeforeWaitForExit=False LaunchBeforeHideWindow=False Thank you! Link to comment Share on other sites More sharing options...
odie Posted December 17, 2016 Author Share Posted December 17, 2016 I cannot get DMDex to work. Not even the dmdex test after installing it. in the CMD prompt I get "dmdext test is not recognized as an internal or external command, operable program or batch file." I am lost. Link to comment Share on other sites More sharing options...
hlr53 Posted December 18, 2016 Share Posted December 18, 2016 Make sure the command prompt is at the same directory where dmdext is located. Try to put a copy in C:\ as a test. Error looks like the wrong directory is set. Link to comment Share on other sites More sharing options...
odie Posted December 18, 2016 Author Share Posted December 18, 2016 Yes that was the problem. But it still is not working with FX2 by itself or via PinballX. I tried running the CMD commands before and after FX2. dmdext mirror --source=pinballfx2 --no-virtual . I have been able to get FX2 to have a backglass with virtual DMD on the second monitor but no luck running with a real DMD. Could be that it is a Steam install? Image in link of error. Link to comment Share on other sites More sharing options...
hlr53 Posted December 18, 2016 Share Posted December 18, 2016 Something to do with that Steam link I'm guessing? I shut down for the night but can look at my system tomorrow if you don't have it solved by then. Link to comment Share on other sites More sharing options...
odie Posted December 18, 2016 Author Share Posted December 18, 2016 I appreciate it. I was able to get the DMD to work with FX2 outside of PinballX. I realized I was using a Beta, not sure if that was the reason or not. Now to troubleshoot how to get FX2 and the DMD to work in PinballX. DMD shows the PinballX splash screen just nothing from FX2. It appears it isn't mirroring in FX2 when launching from PBX. When exit PBX and FX2 it stil shows an image of the DMD on the main display. Link to comment Share on other sites More sharing options...
hlr53 Posted December 18, 2016 Share Posted December 18, 2016 Is FX2 working inside PBX without dmdext launch before enabled? I would attach your PBX log and init files so we can see the settings. My FX2 settings are posted earlier and they work OK for me. Link to comment Share on other sites More sharing options...
odie Posted December 18, 2016 Author Share Posted December 18, 2016 Spoiler [Display] Monitor=0 rotate=270 Windowed=False WindowWidth=480 WindowHeight=720 WindowX=0 WindowY=65 PlayFieldBrightness=230 WheelTextColor=ffffffff WheelTextOutlineColor=ff000000 InfoTextColor=ffffffff InfoTextOutlineColor=ff000000 FilterTextColor=ffffffff FilterTextOutlineColor=ff000000 MenuColor=ff40cf30 [BackGlass] monitor=1 x=0 y=0 width=1920 height=1080 AutoPositionB2S=True UseB2S=True [DMD] Enabled=True monitor=2 x=0 y=0 width=1040 height=272 AutoPositionPinMAME=True [FileSystem] EnableFileMatching=False [Interface] DesktopModeEnabled=False EnableAdditionalDetail=True ShowSystem=True ShowRatings=True [Audio] StreamVolume=90 SampleVolume=90 PlaySoundInVideos=True [Startup] playsound=False playvideo=False StartWithWindows=No [KeyCodes] quit=27 left=37 right=39 select=13 rotate=82 pageleft=33 pageright=34 exitemulator=27 ingame=80 screenshot=83 screenshotbackglass=66 instructions=73 volumedown=109 volumeup=107 credit=53 plunger=164 [JoyCodes] quit=7 left=9 right=1 select=10 rotate=3 pageleft=10 pageright=2 exitemulator=7 ingame=6 instructions=14 Credit=11 Plunger=0 [Text] Line1=Free Play Line2=Press Start Featuring=Featuring Tables=Tables PlayGame=Play Game Instructions=Instructions Information=Information Flyer=Flyer Gameplay=Gameplay Tutorial=Tutorial ExitGame=Exit Game ReturnToGame=Return to Game Return=Return Exit=Exit Shutdown=Shutdown [FuturePinball] Enabled=False WorkingPath=h:\-PINBALL-\-FUTURE PINBALL- TablePath=h:\-PINBALL-\-FUTURE PINBALL-\Tables Executable=Future Pinball.exe Parameters=/open "[TABLEPATH]\[TABLEFILE]" /play /exit /arcaderender LaunchBeforeEnabled=false LaunchBeforeWorkingPath= LaunchBeforeExecutable=notepad.exe LaunchBeforeHideWindow=False LaunchBeforeWaitForExit=True LaunchAfterEnabled=False LaunchAfterWorkingPath= LaunchAfterExecutable=notepad.exe LaunchAfterHideWindow=False LaunchAfterWaitForExit=True MouseClickFocus=True [VisualPinball] Enabled=True WorkingPath=C:\Visual Pinball TablePath=C:\Visual Pinball\Tables Executable=VPinball_9_0_2.exe Parameters=/play -"[TABLEPATH]\[TABLEFILE]" LaunchBeforeEnabled=false LaunchBeforeWorkingPath= LaunchBeforeExecutable=notepad.exe LaunchBeforeHideWindow=False LaunchBeforeWaitForExit=True LaunchAfterEnabled=False LaunchAfterWorkingPath= LaunchAfterExecutable=notepad.exe LaunchAfterHideWindow=False LaunchAfterWaitForExit=True AutoConfigure=True [ExitScreen] Enabled=True EnableExit=True EnableShutdown=True [StartupProgram] Enabled=True WorkingPath=C:\Users\SteamBox Executable=dmdext.exe Paramaters= HideWindow=true WaitForExit=false Parameters=dmdext mirror --source=pinballfx2 --no-virtual [ExitProgram] Enabled=false WorkingPath= Executable=notepad.exe Paramaters= HideWindow=False WaitForExit= [AttractMode] Enabled=True Timer=1 ShowFor=15 MuteAudio=False [System_1] Name=MAME Enabled=False WorkingPath=C:\- EMULATORS -\- MAME - TablePath=C:\ Executable=mamep64.exe Parameters=[TABLEFILE] SystemType=0 [AutoExit] Enabled=False Minutes=10 [Login] Enabled=False [PinballFX2] Enabled=True WorkingPath=C:\Program Files (x86)\Steam Executable=steam.exe Parameters=-applaunch 226980 [TABLEFILE] Process=Pinball FX2.exe Rotate=False WaitFor=12 LaunchBeforeEnabled=True LaunchBeforeWorkingPath=C:\Users\SteamBox LaunchBeforeExecutable=dmdext.exe LaunchBeforeWaitForExit=False LaunchBeforeHideWindow=True LaunchBeforeParameters=dmdext mirror --source=pinballfx2 --no-virtual [Internal] lastwheelcachematchsize=-1123 lastselected=DroidsSTARWARS_DroidsPinball FX2 filter_year= filter_company= filter_custom= filtername=Tables [PinballArcade] WorkingPath=C:\Program Files (x86)\Steam Executable=steam.exe Parameters=-applaunch 238260 Process=PinballArcade11.exe WaitForSelect=150 Enabled=True [GameListManager] onlinemode=false [RealDMD] EnableColor=True Color=ff008000 [SetupWizard] EmuPath1=C:\Emulators AssetPath1=C:\Assets RomPath1=C:\Roms DefaultPathPrompt=True DownloadDatabasePrompt=True DownloadEmulatorPrompt=True WizardMode=1 CustomArray= SearchArray= SavePosition=False SectionIndex=13 SearchText= EmulatorIndex=0 EmulatorGroupIndex=0 DaphneIndex=0 HTMLAppsIndex=0 ExternalAppsIndex=0 RadioStationsIndex=0 NewsFeedsIndex=0 MappedDrivesIndex=0 SystemIndex=0 ShowPanel=True FontSize=1 WindowState=0 WindowSize=832,590 WindowLocation=2984,208 [Plugin_1] Enabled=False Name=PlugInLED.dll [Plugin_2] Enabled=False Name=PlugInSpeech.dll [Plugin_3] Enabled=False Name=QuickLaunch (PinballX Edition).dll [Plugin_4] Enabled=False Name=Xpadder Plugin.dll Yes FX2 works within PBX but no DMD on the DMD, the DMD will work when launching DMDext manually before starting PBX and then launching FX2 via PBX. I am also able setup a virtual DMD. So in review PBX launching DMDext= not working Launching DMDext outside of PBX and entering the code and then launching PBX and playing FX2=working Launching DMDext and then FX2 outside of PBX=working In PBX I tried setting up Launch First before PBX and Launch First for FX2 and neither work. ini attached Link to comment Share on other sites More sharing options...
odie Posted December 18, 2016 Author Share Posted December 18, 2016 Spoiler [Display] Monitor=0 rotate=270 Windowed=False WindowWidth=480 WindowHeight=720 WindowX=0 WindowY=65 PlayFieldBrightness=230 WheelTextColor=ffffffff WheelTextOutlineColor=ff000000 InfoTextColor=ffffffff InfoTextOutlineColor=ff000000 FilterTextColor=ffffffff FilterTextOutlineColor=ff000000 MenuColor=ff40cf30 [BackGlass] monitor=1 x=0 y=0 width=1920 height=1080 AutoPositionB2S=True UseB2S=True [DMD] Enabled=True monitor=2 x=0 y=0 width=1040 height=272 AutoPositionPinMAME=True [FileSystem] EnableFileMatching=False [Interface] DesktopModeEnabled=False EnableAdditionalDetail=True ShowSystem=True ShowRatings=True [Audio] StreamVolume=90 SampleVolume=90 PlaySoundInVideos=True [Startup] playsound=False playvideo=False StartWithWindows=No [KeyCodes] quit=27 left=37 right=39 select=13 rotate=82 pageleft=33 pageright=34 exitemulator=27 ingame=80 screenshot=83 screenshotbackglass=66 instructions=73 volumedown=109 volumeup=107 credit=53 plunger=164 [JoyCodes] quit=7 left=9 right=1 select=10 rotate=3 pageleft=10 pageright=2 exitemulator=7 ingame=6 instructions=14 Credit=11 Plunger=0 [Text] Line1=Free Play Line2=Press Start Featuring=Featuring Tables=Tables PlayGame=Play Game Instructions=Instructions Information=Information Flyer=Flyer Gameplay=Gameplay Tutorial=Tutorial ExitGame=Exit Game ReturnToGame=Return to Game Return=Return Exit=Exit Shutdown=Shutdown [FuturePinball] Enabled=False WorkingPath=h:\-PINBALL-\-FUTURE PINBALL- TablePath=h:\-PINBALL-\-FUTURE PINBALL-\Tables Executable=Future Pinball.exe Parameters=/open "[TABLEPATH]\[TABLEFILE]" /play /exit /arcaderender LaunchBeforeEnabled=false LaunchBeforeWorkingPath= LaunchBeforeExecutable=notepad.exe LaunchBeforeHideWindow=False LaunchBeforeWaitForExit=True LaunchAfterEnabled=False LaunchAfterWorkingPath= LaunchAfterExecutable=notepad.exe LaunchAfterHideWindow=False LaunchAfterWaitForExit=True MouseClickFocus=True [VisualPinball] Enabled=True WorkingPath=C:\Visual Pinball TablePath=C:\Visual Pinball\Tables Executable=VPinball_9_0_2.exe Parameters=/play -"[TABLEPATH]\[TABLEFILE]" LaunchBeforeEnabled=false LaunchBeforeWorkingPath= LaunchBeforeExecutable=notepad.exe LaunchBeforeHideWindow=False LaunchBeforeWaitForExit=True LaunchAfterEnabled=False LaunchAfterWorkingPath= LaunchAfterExecutable=notepad.exe LaunchAfterHideWindow=False LaunchAfterWaitForExit=True AutoConfigure=True [ExitScreen] Enabled=True EnableExit=True EnableShutdown=True [StartupProgram] Enabled=True WorkingPath=C:\Users\SteamBox Executable=dmdext.exe Paramaters= HideWindow=true WaitForExit=false Parameters=dmdext mirror --source=pinballfx2 --no-virtual [ExitProgram] Enabled=false WorkingPath= Executable=notepad.exe Paramaters= HideWindow=False WaitForExit= [AttractMode] Enabled=True Timer=1 ShowFor=15 MuteAudio=False [System_1] Name=MAME Enabled=False WorkingPath=C:\- EMULATORS -\- MAME - TablePath=C:\ Executable=mamep64.exe Parameters=[TABLEFILE] SystemType=0 [AutoExit] Enabled=False Minutes=10 [Login] Enabled=False [PinballFX2] Enabled=True WorkingPath=C:\Program Files (x86)\Steam Executable=steam.exe Parameters=-applaunch 226980 [TABLEFILE] Process=Pinball FX2.exe Rotate=False WaitFor=12 LaunchBeforeEnabled=True LaunchBeforeWorkingPath=C:\Users\SteamBox LaunchBeforeExecutable=dmdext.exe LaunchBeforeWaitForExit=False LaunchBeforeHideWindow=True LaunchBeforeParameters=dmdext mirror --source=pinballfx2 --no-virtual [Internal] lastwheelcachematchsize=-1123 lastselected=DroidsSTARWARS_DroidsPinball FX2 filter_year= filter_company= filter_custom= filtername=Tables [PinballArcade] WorkingPath=C:\Program Files (x86)\Steam Executable=steam.exe Parameters=-applaunch 238260 Process=PinballArcade11.exe WaitForSelect=150 Enabled=True [GameListManager] onlinemode=false [RealDMD] EnableColor=True Color=ff008000 [SetupWizard] EmuPath1=C:\Emulators AssetPath1=C:\Assets RomPath1=C:\Roms DefaultPathPrompt=True DownloadDatabasePrompt=True DownloadEmulatorPrompt=True WizardMode=1 CustomArray= SearchArray= SavePosition=False SectionIndex=13 SearchText= EmulatorIndex=0 EmulatorGroupIndex=0 DaphneIndex=0 HTMLAppsIndex=0 ExternalAppsIndex=0 RadioStationsIndex=0 NewsFeedsIndex=0 MappedDrivesIndex=0 SystemIndex=0 ShowPanel=True FontSize=1 WindowState=0 WindowSize=832,590 WindowLocation=2984,208 [Plugin_1] Enabled=False Name=PlugInLED.dll [Plugin_2] Enabled=False Name=PlugInSpeech.dll [Plugin_3] Enabled=False Name=QuickLaunch (PinballX Edition).dll [Plugin_4] Enabled=False Name=Xpadder Plugin.dll Link to comment Share on other sites More sharing options...
odie Posted December 18, 2016 Author Share Posted December 18, 2016 11:19:45.9 12/18/2016: PinballX - Version 2.28 11:19:46.0 12/18/2016: Windows 7 Ultimate Service Pack 1 64-bit (7.9GB) 11:19:46.0 12/18/2016: Loading Settings 11:19:46.0 12/18/2016: Launching Startup Program: dmdext.exe 11:19:46.0 12/18/2016: C:\Users\SteamBox\dmdext.exe dmdext mirror --source=pinballfx2 --no-virtual 11:19:46.0 12/18/2016: Initialize Component 11:19:46.0 12/18/2016: Initialize Display 11:19:47.2 12/18/2016: Loading PlugIns 11:19:47.3 12/18/2016: Created DirectX BackGlass Window 11:19:47.4 12/18/2016: Hiding Cursor 11:19:47.4 12/18/2016: Hiding Taskbar 11:19:47.4 12/18/2016: Real DMD Intialized 11:19:47.4 12/18/2016: CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz 11:19:47.4 12/18/2016: GPU 1: NVIDIA GeForce GTX 960 11:19:47.4 12/18/2016: Displays: 2 11:19:47.4 12/18/2016: Load Game List 11:19:47.4 12/18/2016: Loading Database: Pinball FX2 11:19:47.4 12/18/2016: Loading Database: Pinball Arcade 11:19:47.5 12/18/2016: Loading Database: Visual Pinball 11:19:47.5 12/18/2016: Finding and matching artwork and videos 11:19:47.6 12/18/2016: Loading Game Statistics and Scores 11:19:48.3 12/18/2016: Main display running full screen windowed. 11:19:53.1 12/18/2016: Loading Surfaces 11:19:53.3 12/18/2016: Finished Loading Surfaces 11:19:53.3 12/18/2016: Initialize Audio 11:19:53.3 12/18/2016: Set Keyboard Controls 11:19:53.3 12/18/2016: Initialize Joystick 11:19:53.4 12/18/2016: Auto configure Visual Pinball 11:19:53.4 12/18/2016: 1 Joystick Attached 11:19:53.4 12/18/2016: Started 11:19:56.3 12/18/2016: Launch System 11:19:56.3 12/18/2016: Waiting for threads 11:19:56.3 12/18/2016: Disposing display 11:19:57.7 12/18/2016: C:\Users\SteamBox\dmdext.exe dmdext mirror --source=pinballfx2 --no-virtual 11:19:57.8 12/18/2016: C:\Program Files (x86)\Steam\steam.exe -applaunch 226980 STARWARS_Droids 11:20:12.3 12/18/2016: Found Pinball FX 2 Process 11:20:14.0 12/18/2016: Exit System Control Pressed 11:20:15.4 12/18/2016: Created DirectX BackGlass Window 11:20:15.4 12/18/2016: Real DMD Intialized 11:20:15.4 12/18/2016: Main display running full screen windowed. 11:20:18.0 12/18/2016: Exiting 11:20:18.0 12/18/2016: Showing Taskbar 11:20:18.0 12/18/2016: Unhiding Mouse Cursor 11:20:18.0 12/18/2016: Disposing Plugins 11:20:18.0 12/18/2016: Saving Settings 11:20:18.0 12/18/2016: Bye Link to comment Share on other sites More sharing options...
hlr53 Posted December 18, 2016 Share Posted December 18, 2016 I just fired up PBX, ran a Star Wars table, and shut it down: 14:47:53.7 12/18/2016: PinballX - Version 2.28 14:47:53.7 12/18/2016: Windows 10 Pro 64-bit (15.9GB) 14:47:53.7 12/18/2016: Loading Settings 14:47:53.7 12/18/2016: Initialize Component 14:47:53.8 12/18/2016: Initialize Display 14:47:54.9 12/18/2016: Loading PlugIns 14:47:55.5 12/18/2016: Created DirectX BackGlass Window 14:47:55.5 12/18/2016: Created DirectX DMD Window 14:47:55.6 12/18/2016: CPU: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz 14:47:55.6 12/18/2016: GPU 1: NVIDIA GeForce GTX 1080 14:47:55.6 12/18/2016: Displays: 2 14:47:55.6 12/18/2016: Load Game List 14:47:55.6 12/18/2016: Loading Database: Pinball FX2 14:47:55.7 12/18/2016: Loading Database: Pinball Arcade 14:47:55.7 12/18/2016: Loading Database: Visual Pinball 14:47:55.7 12/18/2016: Finding and matching artwork and videos 14:47:55.9 12/18/2016: Loading Game Statistics and Scores 14:47:56.6 12/18/2016: Loading Surfaces 14:47:56.7 12/18/2016: Finished Loading Surfaces 14:47:56.7 12/18/2016: Initialize Audio 14:47:56.8 12/18/2016: Set Keyboard Controls 14:47:56.8 12/18/2016: Initialize Joystick 14:47:56.9 12/18/2016: Auto configure Visual Pinball 14:47:56.9 12/18/2016: No Joysticks Attached 14:47:56.9 12/18/2016: Started 14:48:01.5 12/18/2016: Launch System 14:48:01.5 12/18/2016: Waiting for threads 14:48:01.5 12/18/2016: Disposing display14:48:02.3 12/18/2016: D:\\DMDext.exe mirror --source=pinballfx2 --no-virtual --quit-when-done 14:48:02.3 12/18/2016: C:\Program Files (x86)\Steam\steam.exe -applaunch 226980 STARWARS_Episode_4 14:48:14.6 12/18/2016: Found Pinball FX 2 Process 14:48:18.2 12/18/2016: Exit System Control Pressed 14:48:19.5 12/18/2016: Created DirectX BackGlass Window 14:48:19.6 12/18/2016: Created DirectX DMD Window 14:48:26.8 12/18/2016: Exiting 14:48:26.8 12/18/2016: Disposing Plugins 14:48:26.8 12/18/2016: Saving Settings 14:48:26.8 12/18/2016: Bye Maybe put a copy of DMDext into your root directory temporarily :c:\ and change the Launch before working path in PBX settings to there and see what happens? Maybe someone else will see something comparing our log files? Link to comment Share on other sites More sharing options...
odie Posted December 21, 2016 Author Share Posted December 21, 2016 I got it working. Simple reboot. Link to comment Share on other sites More sharing options...
hlr53 Posted December 21, 2016 Share Posted December 21, 2016 Good to go Link to comment Share on other sites More sharing options...
Recommended Posts