Jump to content

All my products and services are free. All my costs are met by donations I receive from my users. If you enjoy using any of my products, please donate to support me. Thank you for your support. Tom Speirs

Patreon

How do I get the DMD settings to stick?


jangus

Recommended Posts

I have 3 monitors.

Monitor 1: Playfield

Monitor 2: Backglass

Monitor 3: DMD

When in select game mode I have the backglass on the DMD monitor (3).

As soon as start a game the backglass is in the correct monitor (2).

When I start PinballX after a fresh computer start the DMD allways show up in the Backglass monitor (2). I then have to drag it to the DMD monitor (3).

If I quit PinballX and restart it without restarting the computer the DMD is in the correct monitor.

One more question. How do I get the DMD to turn 90° CW?

PinballX.ini starts:

[Display]
Monitor=0
rotate=270
Windowed=False
WindowWidth=1920
WindowHeight=1080
WindowX=0
WindowY=65
PlayFieldBrightness=230
WheelTextColor=ffffffff
WheelTextOutlineColor=ff000000
InfoTextColor=ffffffff
InfoTextOutlineColor=ff000000
FilterTextColor=ffffffff
FilterTextOutlineColor=ff000000
MenuColor=ffffa500
[backGlass]
monitor=1
x=0
y=0
width=1680
height=1050
[DMD]
Enabled=True
monitor=2
x=0
y=0
width=384
height=96
Link to comment
Share on other sites

Clockwise? I use a real DMD but my guess again is rotate the DMD monitor so it's sideways. Other than. That it's a case by case basis in the table scripts.

Look for. Controller and the setting. .rol =0 or 1. Rol is the rotate setting.

Link to comment
Share on other sites

  • 2 weeks later...

Real DMD: tried twice but none of the two first pinDMD I bought worked. The second one where sent to me free after I returned the first one. They tested the returned one and it was found not working. I do not see it worth the freight cost to continue.

Rotate monitor: Hmm I an trying to get 2 monitors into the backbox. Possibly a laptop monitor for the DMD. So to rotate the monitor: no.

I changed the "rol" from 1 to 0 on one game and that worked. I hope I can get it to work on the rest to.

Thank you xagesz!!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...