epicfatigue

Hey everyone So i have finished the major part of the USB rotatable interface. At the moment all i have to do is build the Automatic KVM feature in. Then i have to add switches to the Rotate.exe file like below. Rotate.exe -right Rotate.exe -left Rotate.exe -deguass It also has a a GUI interface that allows you to manually Rotate Left, Rotate Right, Degauss. It Operates as follows. Rotate Right Selected by GUI or Rotate.exe -right Monitor Relay Is turned on (turning off the monitor) 5v is applied HVBridge (High) Rotating the monitor Right Limit Switch is pressed Turns off rotating, Turns off Monitor Relay(Monitor Comes on), Degaussing Coil fired. Message is Sent to GUI Letting user known the position. Rotate Left Selected by GUI or Rotate.exe -left Monitor Relay Is turned on (turning off the monitor) 5v is applied HVBridge (High) Rotating the monitor Left Limit Switch is pressed Turns off rotating, Turns off Monitor Relay(Monitor Comes on), Degaussing Coil fired. Message is Sent to GUI Letting user known the position. Degauss Selected by GUI or Rotate.exe -degauss Deguassing Coil is fired 3 times. 200ms ON 200ms OFF 200ms ON 200ms OFF 200ms ON 200ms OFF If the monitor is in the left position (meaning the left limit switch is pressed) And Rotate left is selected by GUI or Rotate.exe -left The Chip will not turn the monitor off nor will it send power to the HV-Bridge. If the monitor is in the Right position (meaning the Right limit switch is pressed) And Rotate Right is selected by GUI or Rotate.exe -Right The Chip will not turn the monitor off nor will it send power to the HV-Bridge. The Chip will not turn the monitor off nor will it send power to the HV-Bridge. I Have taken a Youtube Video for you all, its not an ideal setup and hard to see but you all get the idea. I Would love your feedback, i spent alot of time working on this and i hope you all like it as much as i do. http://youtu.be/oj3v1sMBDOw

Hello Everyone, To save alot of time reposing all my images i will link you to my project (if i am aloud to) The project has been going for awhile and it is a work in progress. Currently it has an automatic rotating monitor, Namco recoil guns with machine gun mode hacked video drivers and so much more. Admins if this is not aloud let me know ill remove the link and manually post the project! Thanks all happy gaming and reading! http://forums.overclockers.com.au/showthread.php?t=1021786

If anyone is interested i making the rapid fire here is a schematic i created And the moment alot of you have been waiting for. see below

Hey Guys here is a better demo of the guns. Semi Automatic and Full Auto

Ohhh hell yess this is just what i needed! Quick question does this function with steam games?

thanks they pretty much all good to go i just finished another project thats pretty sweet aswell, Its the 12v coin counter fully operational running completely separate from the IPAC to save it for the EMF the coil creates http://youtu.be/kARekAEwhD4 Its hard to update multiple threads but you can see the complete build here http://forums.overclockers.com.au/showthread.php?t=1021786

oath it is! I think i have the automatic recoil at the right speed, took alot of fine tuning what do you think?

haha Here are the guns in action!!!

Another update, Automatic mode for the Namco Recoil gun, for games that call for rapid fire and for when you just want to use it controllable by a toggle switch for on or off

Sorry guys have been so busy lately. Here is the completed automatic KVM switch, this allows use of two graphics cards hooked to one machine. It will allow display 1 to be connected to the arcade machine on bootup, once windows/linux loads the KVM will automatically switch to the second output. a hacked HD4890 using calamity drivers. The purpose is to allow native bios support for configuration maintenance, then to load a hacked 4890 to have a wide range of resolutions available Here is a picture of the custom kvm very poor video of it in action in the machine. and it working on the bench, Currently working on a machine gun mode for the Namco recoil gun!

i can click the fields and i can use a keybaord to input to them, however if i use the ipac i get nothing i can select clear or cancel using the ipac (moving up and down and can even use shift and hit my eneter key) to select cancel or clear but no input goes in. open up a notepad and the ipac sens all conmands fine to that. where is the ini located so i can put them in manually

hi guys above the keybaord section displays grey as well i can take a picture of that too if you like but its the same.... looking like another format... again,,...

hey thanks all same thing in keyboard never had this happen

Hey everyone i have an unusual problem. I am unable to input my custom controlers via the setup. This is a clean install i can post log if needed but its never been run so its all default. I Tested in notepad and the Ipac utility and all inputs are working correctly has anyone experienced this issue>''is there a way i can manually input it to get me by? Windows XP 64