arcadegeek23

Currently my FX2 tables launch via steam -app command line direct to the table. I am wondering if there is a command line switch to load to the hotseat menu for the game instead.

Good news to report. Thanks for the tip on the Display Changer II. I changed the configuration to now use the BG by default and then switch to the playfield when starting Pinballx and then back to the BG when exiting. That only didn't fix the issue of the DMD not displaying correctly on first maching power-on but I did notice that the DMD was behind the playfield. I changed the setting in PinballX to be on Display #2 which is the orginal number when the maching detects the display and it now works from a cold boot. Success! Brad let me know if you want my .ini file etc if it will help with default setups. Machine is awesome!

I have one of VPCabs machine and I see this behavior. I have installed the Shark007 codecs etc but no change. It appears to be an issue on the order of the three monitors as they are powered on after a cold start. After Windows resets the playfield display to main it holds on a warm reboot and then when PinballX is started the DMD display works. On a cold boot the backglass monitor is where the initial desktop shows and it flips on the playfield monitor is fully on. It appears to be an issue with they way PinballX looks at the three monitors. I tested swapping the monitor numbers in the Pinballx and then I didn't get the backglass but I get the DMD display so it does have to do with the changing of the primary display after windows starts. The only way all three display correctly in this three monitor setup if you do a warm reboot.