wrd1972

I am already running 10.8 latest Betas. It still seems to be working fine. Here is what I have for the DPI override on the VP executable:

The issue is related to adjusting the scaling setting to 125%. I am doing this to make the icons bigger on the screens due to the high-res I am using. It also appears that this setting is enlarging the DB2S backglass images by 125% too, but this does NOT happen using PinballX. I have it all working now by using the override DPI setting within the VP10 executable instead of the one for PinballX. So with the DPI override checked in the VP10 executable, the backglass images are shown at the normal 100% setting. Now things are consistent. Thanks guys for chiming in.

Thought I did. Will replay back soon.

Attached.PinballX.inilog.txt Another detail:

Take a look at this. The backglass images are properly sized through VPX editor, but are jacked when viewed through PinballX. I cant find a fix for this in PinballX settings. Why is it not simply showing the same backglass dimensions as shown when using the editor? What's going on here? Thanks

User error. Audio not configured correctly. All good now. Thanks guys.

Ok. But how about the speech coming out from the back right transducer. Any way to tweak that so it comes out the backbox speakers?

I will look this weekend. Can you guys mention to Tom to consider using the one that allows a wider choice of speech options? One more thing. I am using the 7.1 SSF audio on my cab. The speech is coming out the rear right transducer. Is this the way its intended to work? Ideally, I would think it should come out the two speakers in the backbox. Just wondering if you guys are seeing the same. Is there a way that I can move the speech to the backbox speakers? You guys rock. Thanks again for the help hjere. Bill

Okay I am seeing the same thing Scutters saw. Within the control panel (see attachment), I can change the voice and it does change for PBX. But, I only have three voices to choose from even though I downloaded several others. Yes, weird!

10 Pro here. Will try through the control panel as mentioned.

Chalking this one up to likely user error. This can close.

Okay I changed the voice within windows to a female voice. But, the change did not carry-over to the speech when browsing table in PBX. I researched this and saw where someone else encountered the same thing. So is there another step involved to have PBS use the voice that is selected within Windows?

This can be closed. Recorder is working fine. It was user error.

So I have always noticed that the videos shown when browsing have a white hazy appearance too, and I have seen this on two different PF TVs. I will try to post a photo of the table in browsing mode and play mode. Its not a big deal for me, but it would be nice if it can be tuned out.

Okay here is an update. When I use the global "create videos" feature, it appears to be working as designed. It does not appear to be skipping tables at all. I was "ASSuming" it would go through the tables in alphabetical order, but this does not seem to be the case. It seems to go after EM tables and early 80's tables first, and then it moves onto to DMD tables towards the end. Anyone know what the order is that the PinballX recorder follows when using the global "create videos" function? I have not tested enough yet to see if its looking at year or something else. Buts its definitely not alphabetical order. Have not looked at DBM yet.

I will also lookover DBM tonight too.

Load times are longer through the editor too. For example, AC/DC get skipped over when using the automatic recorder. However, if I use the recorder at the AC/DC table level, it records just fine. Of course I could do all these problematic recordings one at a time, but thats obviously not ideal. For maintenance type work like this, I run windowed mode. I will look it over closer tonight and post some logs.

Okay I have been using the automatic recorder located in the game manager, but I am finding that some table do not get recorded. It seems the simpler EM tables record fine, but the more complex DMD tables do not. Ever since I installed a 4k-120hz playfield TV, it takes 4-5x longer for tables to load. Could there be a recorder time-out issue that is causing these tables to be passed over? I dont think there is an issue with the recorder, I think it might be a setting. Has anyone experienced this? If its a time-out issue, is there a way I can raise the time-out threshold so my more complex tables will auto record? Thanks

Thanks guys. Will check it out.

So in the past, I had been creating my own speech files for the various titles when browsing and it was a painstaking process, but what I am seeing here with this new feature certainly makes it a ton more easy. Many thanks for adding this to PBX. You guys must have read my mind. Scary! So when I was doing this, I was using a sexy female voice that would call out the titles when scrolling, and it really made for a very cool effect. Please consider adding additional voices if possible to this feature. I will even pay a license for it if need be to have more variety. Keep up the great work Tom and all. You guys seriously rock.

Okay I redid things and made a copy of the ini. I really appreciate the help, but I am not gonna dig further to figure out what went screwy. Hell, it could have been the beer deleting shit for all I know. If it disappears agin I will chime in. Thanks Bill

Here it is. Looks like I need to rebuild it. But I will make a copy of the file this time. Thanks. PinballX.ini

Okay I have loaded all of my emulator settings twice now, but they keep disappearing. They test fine when configuring, but when I come back in a few hours to play, thy are all gone. I have configured PinballX many times before, but have not seen this. Any ideas? Thanks

Just wanting to know if there is a random selection feature that can randomly pick a table in PBX. Thanks