cnells2000 Posted July 31, 2014 Share Posted July 31, 2014 I have ssf.exe[virtual-drive] but it wont boot. I have DTlite installed Link to comment Share on other sites More sharing options...
fRequEnCy Posted July 31, 2014 Share Posted July 31, 2014 1st - Is the image being mounted by DTlite? 2nd - If being loaded, did you set ssf to use that drive so that it looks for the image there instead of somewhere else? 1 Link to comment Share on other sites More sharing options...
cnells2000 Posted August 16, 2014 Author Share Posted August 16, 2014 Sorry im so late on this post. hope you (or someone) is still around...when i boot the game through Gameex i see dt lite mount the iso, stays there for one sec, then i see it unmount and it returns back to the frontend. But when i mount it in the same dt drive outside of gameex it loads correctly...plz help Link to comment Share on other sites More sharing options...
cnells2000 Posted August 16, 2014 Author Share Posted August 16, 2014 anyone? Link to comment Share on other sites More sharing options...
Draco1962 Posted August 16, 2014 Share Posted August 16, 2014 I don't run this emulator so I am not going to be much help, but just thought I'd ask if you are running anything like Adultery's Virtual Drive Loader plugin? I know that one of the fixes he put in this addresses an issue with Sega Saturn/SSF loading before mounting was completed. 1 Link to comment Share on other sites More sharing options...
cnells2000 Posted August 17, 2014 Author Share Posted August 17, 2014 Is there a simple step by step guide somewhere on the forums? Ive been trying to boot this up in gameex for two weeks now.........help Link to comment Share on other sites More sharing options...
Draco1962 Posted August 17, 2014 Share Posted August 17, 2014 Is there a simple step by step guide somewhere on the forums? Ive been trying to boot this up in gameex for two weeks now.........helpI do not believe there is. I think I might have asked a few questions, however, that might be pertinent to your issue. Link to comment Share on other sites More sharing options...
Adultery Posted August 17, 2014 Share Posted August 17, 2014 Try this.Enable my plugin that Drac pointed at earlier.Remove the dtools commands from your emu setup's Launch Before/Launch After/Also Launch. Change the emu command-line to this in SSF:ssf.exe [dtloader]Run any game.Play.Enjoy. 2 Link to comment Share on other sites More sharing options...
cnells2000 Posted August 18, 2014 Author Share Posted August 18, 2014 how to i enable the plugin as above?. i already chg'd the command line to the above....... 1 Link to comment Share on other sites More sharing options...
nullPointer Posted August 18, 2014 Share Posted August 18, 2014 how to i enable the plugin as above?. i already chg'd the command line to the above.......You'll want to go to:Start > All Programs > GameEx > Plugin ManagerNext you'll want to place a check in the corresponding checkbox to enable the Virtual Drive Loader plugin, but you'll also want to configure the plugin for your particular setup (this part is fairly straight forward, but if you hit any snags you can refer to the Virtual Drive Loader Project Thread for a bit of an overview) 1 Link to comment Share on other sites More sharing options...
cnells2000 Posted August 18, 2014 Author Share Posted August 18, 2014 i checked it, got to the configure options, but i dont know what command lines im supposed to use to mount the image and unmount commands afterwards. I Used ssf.exe "[ROMPATH]\[ROMFILE]". i Knew that was wrong as two left shoes but i tried it anyway. In The Loader Section do i leave the C:\Program Files (x86)\DAEMON Tools Lite\DTLite.exe? or chg that too? my isos, bins, cues and nrgs are located in E:\Roms\Sega Saturn and show up in gameex. when i click daytona usa for example. the screen goes dark for about 8 seconds looks like its trying to do something in the background, then it returns back to gameex........ Link to comment Share on other sites More sharing options...
nullPointer Posted August 18, 2014 Share Posted August 18, 2014 The mount and unmount commands enterable via the plugin are not for your emulator commands, but rather the actual commands you want to send to DaemonTools Lite. See here for Daemon Tools LIte command line parameters. If I were to guess I'd say you'll be looking at something likeMount:DTLite.exe -mount scsi, 0,"[ROMPATH]\[ROMFILE]"andUnmount:DTLite.exe -unmount scsi, 0But that's just a guess without knowing specifically how you have Daemon Tools configured on your system (i.e virtual drive enumeration, SCSI vs DT, etc.)When in doubt turn on Debug mode in the Plugin Configuration Utility. 1 Link to comment Share on other sites More sharing options...
cnells2000 Posted August 18, 2014 Author Share Posted August 18, 2014 Ok. getting closer..i see dt lite mount the image, unmount it real quick then return back to Gameex. In the gameex menu should i keep ssf.exe [dtloader] in the gameex command line? Link to comment Share on other sites More sharing options...
nullPointer Posted August 18, 2014 Share Posted August 18, 2014 Yessir. When you run the emulator in GameEx, the [dtloader] switch is used to activate the plugin, which in turn will utilize the mount (and corresponding unmount) commands you entered into the Plugin Configuration Utility to load the disc image. 1 Link to comment Share on other sites More sharing options...
cnells2000 Posted August 18, 2014 Author Share Posted August 18, 2014 so why am i experiencing whats going on? its got to be 1 or two things thats not right...i feel like its almost there Link to comment Share on other sites More sharing options...
cnells2000 Posted August 18, 2014 Author Share Posted August 18, 2014 im not using scsi drives as far as i know. so whats the other commands w/o scsi in it? ill input these in the virtual loader boxes for mount and unmount. Link to comment Share on other sites More sharing options...
cnells2000 Posted August 18, 2014 Author Share Posted August 18, 2014 see? Link to comment Share on other sites More sharing options...
cnells2000 Posted August 18, 2014 Author Share Posted August 18, 2014 and for v loader... Link to comment Share on other sites More sharing options...
nullPointer Posted August 18, 2014 Share Posted August 18, 2014 It looks like both your drives are configured as DT rather than SCSI. Try the following:Mount:DTLite.exe -mount dt, 0,"[ROMPATH]\[ROMFILE]"andUnmount:DTLite.exe -unmount dt, 0You'll also need to configure the default drive in SSF to utilize the drive you'll be mounting images to (if you've not already done so). Also don't forget to use the Debug Mode in the Virtual Drive Loader. It will help you to identify any problems that may occur with loading your disc images. Link to comment Share on other sites More sharing options...
cnells2000 Posted August 18, 2014 Author Share Posted August 18, 2014 changed all of that, i load the game i see dtlite at the bottom left part of the screen mount the image then it immediately un mounts it and returns to the frontend. ssf works outside of gameex no prob though when i mount it to drive 0 in dtlite..........urghhhhh!!!! this ish is hard.......... Link to comment Share on other sites More sharing options...
Draco1962 Posted August 18, 2014 Share Posted August 18, 2014 I think the time has come for you to provide us with a copy of your emulator config for SSF, gameex.ini and log.txt (Click here for additional information on how to find these files and others that may be required).From another thread it indicated that you are running 13.11 (current version is 13.26). You will need to upgrade to the newest version which may help you better when running the virtual Drive plugin. Please update your version of GameEx and provide the files mentioned above. Thanks! 1 Link to comment Share on other sites More sharing options...
nullPointer Posted August 18, 2014 Share Posted August 18, 2014 In addition to the files requested by Draco, it would also be helpful to turn on the debug mode in the Plugin Settings, and submit a copy of your Virtual Drive Loader log located in the following directory: \GAMEEX\PLUGINS\DT LOADER. This log should indicate if there's a problem with mounting the disc image (and hopefully what that problem is). 1 Link to comment Share on other sites More sharing options...
cnells2000 Posted August 18, 2014 Author Share Posted August 18, 2014 My version is updated i thought....i switched computers almost a yeaf back and i use the same setup and reg. Key that mr. Spiers gave me when i purchased it. It asked me to update it after i installed. It, and i saw it go through the motions..it hasnt asked me since...to update it anymore...thats why i say i thought i was up-to-date...where can i look on the frontend to find out what version im running now? Link to comment Share on other sites More sharing options...
nullPointer Posted August 18, 2014 Share Posted August 18, 2014 Heh ... not to put too fine a point on it, but your GameEx log contains that information. Start Menu > Program Files > GameEx > Utilities > Log File 1 Link to comment Share on other sites More sharing options...
cnells2000 Posted August 18, 2014 Author Share Posted August 18, 2014 Btw, thank you null and draco for putting up with my issues ive been having lately. U guys are great. Im going to search for this stuff now....hold 1.... Link to comment Share on other sites More sharing options...
Recommended Posts